Guys who do you prefer for sanding belts as far as quality goes... Im needing new belts for for Shop Fox Edge sander
Super grit
Quote from: Mad Max on September 16, 2021, 01:00:24 PM
Super grit
Sounds good... but im looking for 6x80 belts,,,nothing on site
Yeah, hard to find on supergrit, try again with link 3/4 + way down the page
https://www.supergrit.com/beltsaojwt.html
Supergrit is okay as long as you get the Zirc ones. The AOs I got there were junk.
Grizzly has good ones to in Zirc
I've had good luck with all of there belts :thumbsup:
Red Label Abrasives. As of a few years ago when I checked prices, they had the best price per sq. in. for both Zirc and AO. Thats with shipping figured in. That might not be the case buying in person.
Which belt is best for sanding the limbs ao or zirk
Zirconium for glassed limbs.
https://www.redlabelabrasives.com/
We use these https://www.redlabelabrasives.com/collections/sanding-belts/products/6-x-89-inch-zirconia-sanding-belts
You can also find them on ebay cheaper at times
I use AO for fine grits just because they are cheap, they don't last long. I use Zirc for serious sanding, usually a 36 grit, the Zirc will outlast an AO 10 to 1.