Trad Gang

Main Boards => PowWow => Topic started by: Cascadecowboy on July 06, 2021, 10:08:17 PM

Title: Looking to pick out a quality takedown.
Post by: Cascadecowboy on July 06, 2021, 10:08:17 PM
Greetings all, a while back I acquired an old tellum takedown that needed new limbs. That project is still shelved for the time being so I'm looking to get another takedown of the same quality in the meantime. I've been looking at the Wapiti Bugle, some of Hill Countrys offerings, and ET William's. I would appreciate some guidance as I'm a rookie to traditional bow hunting and also an 6'4in so I need something I can draw comfortably beyond 28in. My eventual game plan is to hunt mule deer and elk so I'll be looking at something at least 45lbs. Any suggestions?
Title: Re: Looking to pick out a quality takedown.
Post by: Orion on July 06, 2021, 11:08:55 PM
Be hard pressed to find a better bow than a B riser Bear takedown and no. 3 limbs (longs).  That makes a 64-inch bow.  Lots of Bear limbs around, and they keep making more so availability will likely not be a problem.  That being said, Bear is behind on production right now, but can usually find nice used bows for sale on this and other trad sites and the big auction site. 
Title: Re: Looking to pick out a quality takedown.
Post by: Cascadecowboy on July 07, 2021, 12:06:42 AM
The Bears have been on my radar as well. I was thinking I would shoot for something in the 69-71 in range with 64 being my minimum. I want to be sure I'm not setting myself up for stacking. I figured the longbow route would be the way to go.
Title: Re: Looking to pick out a quality takedown.
Post by: PrimitivePete on July 07, 2021, 05:11:45 AM
Consider Robertson Stykbows, I picked up a used Vision Falcon and I can easily admit it is the best bow I have ever owned. Perfect balance of smooth draw, consistent shot placement and perfectly made.
Title: Re: Looking to pick out a quality takedown.
Post by: Dave Lay on July 07, 2021, 06:59:50 AM
Lots of today's recurve and longbows allow for a long draw without a lot of bow length. You didn't saw what your actual draw was but I'd think a 62-64" recurve would work nicely unless you want a longbow then I'd look at a 66"
Title: Re: Looking to pick out a quality takedown.
Post by: Roy from Pa on July 07, 2021, 07:02:34 AM
Welcome to Trad Gang.

There is a classifieds section here on trad gang.

There are hundreds of bows for sale including bear takedowns and limbs.

There is a $35.00 yearly fee to access the classifieds. 

The link below will take you there.

http://tradgang.com/sponsors/cm.html
Title: Re: Looking to pick out a quality takedown.
Post by: elkhunter45 on July 07, 2021, 07:04:16 AM
Like was suggested earlier a Bear Kodiak Takedown B riser with number 3 limbs. The no tool takedown feature is unsurpassed in ease of use. That being said, I would not overlook a 21" ILF riser if you not opposed to a more modern look. The variety of limbs available makes for endless options in the future.  They do make some nice wood risers these days that kind of blend the old with the new.

BTW my son is 6'-5" and shoots a 62" Predator and a 60" PSA Black Widow just fine. The amount of working limb is what matters on stacking. Sensitivity to finger pinch with shorter bows is more of an issue imho than stack.
Title: Re: Looking to pick out a quality takedown.
Post by: woodchucker on July 07, 2021, 08:11:17 AM
There's a B riser 64# @ 28" on the classifieds right now, not sure what # limbs? ($500)
Title: Re: Looking to pick out a quality takedown.
Post by: Car54 on July 07, 2021, 10:09:42 AM
I have a Pronghorn 3pc.LB, 64",  I'm 6'4" tall.  Bow is ..Super quiet,  smooth draw, stable bow! My Wes Wallace Mentor  64",  3pc recurve, will handle your draw easily also. 
Title: Re: Looking to pick out a quality takedown.
Post by: Alexander Traditional on July 07, 2021, 11:03:50 AM
Quote from: Car54 on July 07, 2021, 10:09:42 AM
I have a Pronghorn 3pc.LB, 64",  I'm 6'4" tall.  Bow is ..Super quiet,  smooth draw, stable bow! My Wes Wallace Mentor  64",  3pc recurve, will handle your draw easily also.

I'm 6'4" tall also. I don't have the draw you guys do though,but I love my Pronghorn. I got it off the classifieds. I have a ton of bows,but shoot this one the most consistent.
Title: Re: Looking to pick out a quality takedown.
Post by: Cascadecowboy on July 07, 2021, 12:55:07 PM
Thanks for the info everyone, I definitely have a lot more to consider. Looking forward to learning more on this forum! :archer2:
Title: Re: Looking to pick out a quality takedown.
Post by: Ray Lyon on July 07, 2021, 09:31:00 PM
Quote from: Orion on July 06, 2021, 11:08:55 PM
Be hard pressed to find a better bow than a B riser Bear takedown and no. 3 limbs (longs).  That makes a 64-inch bow.  Lots of Bear limbs around, and they keep making more so availability will likely not be a problem.  That being said, Bear is behind on production right now, but can usually find nice used bows for sale on this and other trad sites and the big auction site.

Agree with this.  B handle and #3 limbs
Title: Re: Looking to pick out a quality takedown.
Post by: Tom on July 08, 2021, 06:32:01 PM
Don't know where you live but the best suggestion I have is to go to as many shoots as you can and ask people if you might try their bow. You'd be surprised how many people would let you do this. That way you will get a feel for both a riser that fits you and also a workable length bow. I'm short but have a 29.5" draw so like bows in the 62-66" range to get smooth stack free draw-probably slower than shorter bows but smooth and quiet is my concern. So many well made bows it is hard to pick any one that will fit you-you need to handle to find the one-if that's possible to find just one.
Title: Re: Looking to pick out a quality takedown.
Post by: George Vernon on July 08, 2021, 08:23:28 PM
Take a look at the Mentor and the Stealth.  They are the 3 piece take downs made by Wes Wallace.
You can get a brand new bow made to your spec without breaking the bank.  Wes will walk you through the ordering process and make sure what you buy fits.  He may even have a stock bow or two you can test drive.  Shooting the bows is really the only way to find out what works for you.







Title: Re: Looking to pick out a quality takedown.
Post by: Terry Lightle on July 11, 2021, 07:27:18 PM
I like 2 piece takedowns,and am a Wild Horse Creek fan
Title: Re: Looking to pick out a quality takedown.
Post by: Mike Malvaini on July 12, 2021, 02:05:30 PM
Any of the sponsors here would be quality. Have fun choosing!
Title: Re: Looking to pick out a quality takedown.
Post by: bluemelonchitlin on July 13, 2021, 04:40:56 PM
Consider something from Abe Penner at Cari-Bow.
Title: Re: Looking to pick out a quality takedown.
Post by: bigbadjon on July 14, 2021, 12:24:26 AM
My choice would be a Hoyt Sattori riser and whatever ilf limbs you choose. I like the smaller builders but if you need new limbs on a non ilf riser it is usually tedious with wait lists and builders hanging it up.
Title: Re: Looking to pick out a quality takedown.
Post by: blacktailbob on July 14, 2021, 08:53:15 AM
I'm a tad partial to Blacktails. My Sitka is 62" 44@30 and I draw 30.25 and it's smooth all the way even though they recommend a longer bow for a longer draw.
Being a lefty doesn't give me many bows at all to tryout at any of the shoots but Tom's suggestion is a good way to help make your decision.
Title: Re: Looking to pick out a quality takedown.
Post by: Judd on July 26, 2021, 02:58:53 PM
I would look into ILF risers, particularly the aluminum ones.
The aluminum riser have more features typically, than wooden risers, to help you tune your arrow.
There are so many different limbs styles, lengths, quality and pricing options, that there is probably something to meet your needs.
You might want to try a 19" long riser, not too long for hunting, and not too short for target shooting.
Make sure the poundage and draw length you need are for a 19" riser as most limbs are not rated for a 19" riser, but for a 23" - 25" riser.
Check the used trad archery sites as there is usually something there for sale.
Title: Re: Looking to pick out a quality takedown.
Post by: trad_bowhunter1965 on July 26, 2021, 03:03:15 PM
Take a look at Yellowstone Bows Rich's Halfbreed take down is hard to beat.
Title: Re: Looking to pick out a quality takedown.
Post by: Russell Southerland on July 26, 2021, 10:24:38 PM
You wont have to worry about stacking if you buy a bow tillered to your draw length. For the majority of bowyers, staking is a thing of the past.
Title: Re: Looking to pick out a quality takedown.
Post by: mec lineman on July 27, 2021, 07:12:42 AM
I will agree with everything above. I will also second  YELLOWSTONE  Halfbreed,  great bows similar  to the mentioned  Pronghorn.
Title: Re: Looking to pick out a quality takedown.
Post by: oldwood on July 27, 2021, 10:56:23 AM
Black Widow would be a good choice
Title: Re: Looking to pick out a quality takedown.
Post by: Bowguy67 on July 30, 2021, 04:07:46 AM
Welcome, try as many bows as possible. Keep your mind open and shoot a lots of  bows to decide.
Title: Re: Looking to pick out a quality takedown.
Post by: Part Time Archer on July 30, 2021, 04:50:33 AM
Steve Turay at Northern Mist.