Decided to build myself a new take down. Only have the Bingham drill jig....needless to say its off by around .020. Anyone ever fill the bolt and pin holes on a set of limbs and re drill? Curious if I could fill with smooth on.
Smoth on should work or you could glue in a hardwood dowel or plug then re-drill. Take care when re-drilling because the bit will want to drift to the softer material.
I've glued hard wood dowels in them with smooth on then redrilled. Covered them with a overlay and you couldn't tell I screwed up. I actually drilled the holes backwards once and had to fix that
I use dowels as well.