Trad Gang

Main Boards => PowWow => Topic started by: Steiger3208 on January 23, 2021, 07:17:26 PM

Title: Bow strings question
Post by: Steiger3208 on January 23, 2021, 07:17:26 PM
Been into traditional archery for many years but never really did any research on bow strings.  So my question is, is there one type or brand of bow string that is universally quiet for any type of bow or is it a trial and error for each bow?
   Thanks, Wes
Title: Re: Bow strings question
Post by: Overspined on January 24, 2021, 08:51:56 AM
There's usually little difference in noise. Some are slightly lower pitched than others but strand count can change it and arrow weight is, IMO the most important determining factor. Also, it's "pleasing" to us when the pitch is lower I believe, so by quiet I'd say probably a lower pitch sounds better to us.
Title: Re: Bow strings question
Post by: Pat B on January 24, 2021, 10:32:46 AM
I think a Flemish twist is quieter than a continuous loop but I have no research to prove it. Also I think the Flemish twist is stronger because it has twice as many strands in the loops than a continuous loop string. I use only B-50 or
B-55 so I can't comment on the FF type strings.
Title: Re: Bow strings question
Post by: McDave on January 24, 2021, 11:23:43 AM
Quote from: Pat B on January 24, 2021, 10:32:46 AM
I think a Flemish twist is quieter than a continuous loop but I have no research to prove it. Also I think the Flemish twist is stronger because it has twice as many strands in the loops than a continuous loop string. I use only B-50 or
B-55 so I can't comment on the FF type strings.

I only make Flemish strings, so I didn't think about continuous loops only having half the strands in the nock loops; I had to think about that for a while before it made sense to me.  I suppose that's why they serve the nock loops rather than just tying them off: to provide a cushion for the string nocks on the bow.

OTOH, what about not needing twists in a continuous loop string?  I've heard that this is an advantage, probably by reducing the overall weight of the string, although I'm not sure about that. I do know that most bowyers send Flemish strings with their bows.  Toelke is (or at least was) an exception.  All the bows I've received from him have had continuous loop strings.
Title: Re: Bow strings question
Post by: durp on January 24, 2021, 11:41:25 AM
mcDave. The serving is what forms the loops
Title: Re: Bow strings question
Post by: Roy from Pa on January 24, 2021, 11:44:52 AM
I'm partial to Flemish twist strings and believe them to be a tad quieter...
Title: Re: Bow strings question
Post by: trad_bowhunter1965 on January 24, 2021, 12:14:10 PM
I have built strings for over twenty years both for compounds and traditional bows and it's true that some string material is quieter than other and some yield more strength that others and stretcher less what I have found out that for me as far as noises go the amount of strands and the weight of the arrow and nock have a lot to do with how quite your bow is.