Print Page - new limbs in, string material advice needed

Title: new limbs in, string material advice needed
Post by: mand0ralen on January 19, 2021, 01:02:35 PM

Hi all,

Just got the new uukha Altai 2021 limbs in. (for my Black Wolf 17 inches carbon riser) :jumper: :jumper: :jumper: :jumper:

Do you have any advice for the string material ?

It's for bowhunting (mainly european wild boar) so silence is the key for me ... but i want a string material that can give me the best of these excellent (but expensive) limbs.

Thank you all for any advice and take care.

++M

Title: Re: new limbs in, string material advice needed
Post by: ROSCO on January 19, 2021, 04:34:22 PM

https://www.uukha.com/en/FAQ-en.php#tune

Title: Re: new limbs in, string material advice needed
Post by: mand0ralen on January 21, 2021, 03:15:24 PM

Thank you for your answer & your time ROSCO,

However, Uukha is more prone to recommend stuff for target shooting and my question is more bowhunting related.

I used to shoot astro but my sppol is finished now ...

Idea anyone ?

Best regards,

M

Title: Re: new limbs in, string material advice needed
Post by: katman on January 22, 2021, 07:27:49 AM

Once I use up my BCY-X supply, since it is no longer made, will switch to either BCY Mercury or X-99, Leaning towards X-99 due to vectran helping to stop creep, important in our hot summers on southeast coast USA. You may due well with Mercury for your needs.

Title: Re: new limbs in, string material advice needed
Post by: Roy from Pa on January 22, 2021, 07:33:00 AM

BCY string material is good material.

Title: Re: new limbs in, string material advice needed
Post by: Miikka on January 24, 2021, 06:06:53 PM

I´ve had nothing but good luck with bearpaw strings and materials. I have their flemish jig and FF string material, if opting for a ready made string go for the bodnik whisper string.

Trad Gang

Main Boards => PowWow => Topic started by: mand0ralen on January 19, 2021, 01:02:35 PM