Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Dawi on July 31, 2020, 05:49:43 AM

Title: Garrapa backed Ipe ?
Post by: Dawi on July 31, 2020, 05:49:43 AM
Hi All,
Does anyone have any advice on using garrapa as a backing for an Ipe longbow?
Title: Re: Garrapa backed Ipe ?
Post by: KenH on July 31, 2020, 07:16:29 AM
Never heard of Garapa wood until now.   BTW, Garrapa (two r) is another name for ticks...,
Title: Re: Garrapa backed Ipe ?
Post by: Dawi on July 31, 2020, 08:28:01 AM
 :biglaugh: :biglaugh: ita a Brazilian/South American  hardwood used in the decking industry.
Title: Re: Garrapa backed Ipe ?
Post by: Mad Max on July 31, 2020, 08:39:21 AM
Garapa and Ipe, It would be a double decker bow https://www.youtube.com/watch?v=9CdVTCDdEwI
Get it, both woods are for decking
Title: Re: Garrapa backed Ipe ?
Post by: Dawi on July 31, 2020, 01:31:58 PM
Indeed....have  you heard of Carbon or glass backed Ipe?
Title: Re: Garrapa backed Ipe ?
Post by: Mad Max on July 31, 2020, 02:21:51 PM
I think Bamboo baked Ipe is the best all wood laminated bow one can make ;)
There is nothing better to back Ipe with.
my 2 cents
Title: Re: Garrapa backed Ipe ?
Post by: Dawi on August 02, 2020, 02:35:24 PM
agreed, thank you.
I have no boo near me at the moment and have itchy fingers :thumbsup:
Title: Re: Garrapa backed Ipe ?
Post by: Dawi on August 02, 2020, 02:37:41 PM
Mad Max..it will also look like a double decker chocolate bar we get here :biglaugh: :biglaugh: :biglaugh:
Title: Re: Garrapa backed Ipe ?
Post by: Mad Max on August 02, 2020, 03:29:17 PM
 :bigsmyl:
Title: Re: Garrapa backed Ipe ?
Post by: Pat B on August 02, 2020, 06:21:08 PM
Hickory backed ipe makes a very good bow also and maybe hard maple/ipe.
Title: Re: Garrapa backed Ipe ?
Post by: Dawi on August 03, 2020, 02:15:37 AM
Thank you Pat
Unfortunately those are hard to come by where i am.
Garapa stats look reasonably close to hickory (and I have some) so was wondering what would happen if I made two 1/8" slats of garapa as a backing lam for some Ipe I have. Do you think its tension abilities are sufficient?
Text only | Text with Images