Print Page - RER Recurve - Arrow Selection and Spine advice

Title: RER Recurve - Arrow Selection and Spine advice
Post by: jenk9319 on June 19, 2020, 06:27:27 PM

I've recently purchased a RER Recurve - 62" A.M.O. 44# @ 28" draw. My draw is 27"

Looking for advice on an arrow selection and spine stiffness if anyone has any insight with these bows. Thanks in advance!!

Title: Re: RER Recurve - Arrow Selection and Spine advice
Post by: Friend on June 19, 2020, 06:57:19 PM

There are many plausible options.

Here are just two ballpark options:

GT 500 Ultralight...~29 7/8"s...250 gn pt...~26% EFOC...~470 gn total

GT 500 Ultralight...~28 15/16"s...50 gn insert..250 gn pt...~28% EFOC...~502 gn total

Note: a 3 x4" feather would be much better than a 3x5" due to the hi FOC and thus increased drag

Title: Re: RER Recurve - Arrow Selection and Spine advice
Post by: The Whittler on June 19, 2020, 10:00:39 PM

600 spine, and don't rule out 700 spine.

Title: Re: RER Recurve - Arrow Selection and Spine advice
Post by: jenk9319 on June 22, 2020, 04:22:59 PM

Thanks for the help!!!!

Title: Re: RER Recurve - Arrow Selection and Spine advice
Post by: Car54 on June 22, 2020, 09:38:15 PM

https://www.3riversarchery.com/traditional-only-fletched-carbon-arrow-test-kit.html

Trad Gang

Main Boards => PowWow => Topic started by: jenk9319 on June 19, 2020, 06:27:27 PM