Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: JGR1269 on May 18, 2020, 06:42:58 PM

Title: Bocote & Ebony
Post by: JGR1269 on May 18, 2020, 06:42:58 PM
Just did the final sanding and it's ready for the finish. 54" Hybrid, 38#@27"[attachment=1]
Title: Re: Bocote & Ebony
Post by: JGR1269 on May 18, 2020, 06:45:27 PM
[attachment=1][attachment=2][attachment=3]
Title: Re: Bocote & Ebony
Post by: Crooked Stic on May 18, 2020, 07:31:35 PM
Thats nice.
Title: Re: Bocote & Ebony
Post by: bucknut on May 18, 2020, 07:51:21 PM
Gonna be a knock out!
Title: Re: Bocote & Ebony
Post by: Robertfishes on May 18, 2020, 08:09:49 PM
Very Nice! Awesome looking grip and tips.
Title: Re: Bocote & Ebony
Post by: Bvas on May 18, 2020, 08:51:06 PM
Nice!!!

Is that a full length veneer on the back?
If not, you hid the seam very well!!
Title: Re: Bocote & Ebony
Post by: Bvas on May 18, 2020, 08:57:34 PM
And what is this???

[attachment=1]
Title: Re: Bocote & Ebony
Post by: monterey on May 18, 2020, 09:08:22 PM
Handsome!
Title: Re: Bocote & Ebony
Post by: JGR1269 on May 18, 2020, 09:43:08 PM
It has a skive joint in the center. I don't care for handle overlays so I try to make the joint as invisible as possible. There will be a medallion inlayed in the riser.
Title: Re: Bocote & Ebony
Post by: Tim Finley on May 19, 2020, 10:59:40 AM
That's very nice ! Bocote always looks good with ebony,  bocote  also looks nice with birdseye maple .
Text only | Text with Images