I use mainly Gordon's ULS in my builds. When I get them from Binghams they are 72" and I am usually left with about 10 inches after using a strip for a takedown limb. What if anything do you guys do with the scrap glass. I hate that I waste so much but to my knowledge you can't get Gordon's by the foot :dunno:
Laminate it into risers to stiffen/strengthen them? You could splice two together and use them on the compression side with no issues.
Mark
I use them as tip reinforcement with wood or other glass color
Tip overlays-front riser overlays-thin tip wedge -glue spreaders.
I use them to spread glue on lams. Other than that, I throw em away.
Keep saving them till you have enough to make a block and shape them into the worlds first translucent riser :goldtooth:
Flem, only problem is it would also be the world's smallest recurve riser at only 10". :goldtooth:
X2 what Crooked Stic said.
Knife handle scales. Laminate different colors and patterns of cloth between layers for different effects.
Stagger them, like laying bricks :goldtooth: