Print Page - 1916 Shafts

Title: 1916 Shafts
Post by: Alexander Traditional on January 28, 2020, 05:16:52 PM

I just got some 1916 swagged nock end shafts off the classifieds. I looked all in the box,and couldn't find any nocks. Will these take 5/16 or 9/32 glue on nocks?

Thanks

Title: Re: 1916 Shafts
Post by: black velvet on January 28, 2020, 06:08:09 PM

I shoot 1916 and use 5/16 nocks. 9/32 should be ok also.

Title: Re: 1916 Shafts
Post by: Alexander Traditional on January 28, 2020, 07:19:42 PM

That's what I needed to know. That will keep me from buying some more,I think I have some 5/16

Title: Re: 1916 Shafts
Post by: McDave on January 28, 2020, 08:16:25 PM

1916's with 5/16 and 9/32 nocks. You can see that either one fits pretty well.

[attachment=1]

Title: Re: 1916 Shafts
Post by: Alexander Traditional on January 28, 2020, 10:51:33 PM

Thanks for the relplies.

McDave I have some 2016 and 2018. I tried 5/16 on the 2018 because I have some 2016 that came with that set up and they fit all the way down. They didn't on the 2018 and looked like the top picture. They were hard to get on there straight. I thought since they were both size 20 that would work. I use 11/32 on the 2018 and 5/16 on the 2016.

I like the way the 5/16 fit all the way down on the second picture.

I have two saying 5/16 so thats the way I'm trying.

Thanks fellas.

Title: Re: 1916 Shafts
Post by: Crooked Stic on January 29, 2020, 07:58:20 PM

Always used 5/16s

Title: Re: 1916 Shafts
Post by: Tucker on January 30, 2020, 11:46:09 PM

5/16" seem to work better for me on 1916's

Trad Gang

Main Boards => PowWow => Topic started by: Alexander Traditional on January 28, 2020, 05:16:52 PM