Got to reading on here about some member asking about how to figure which arrow to use on his bow.
I remembered that Stu Miller had put together a pretty good spine calculator back in 2010 or so. He was adding
arrows every so often to the data base from which to work. I found it to work quite well. Fact is, back then, I did the figuring for several old members here.
Is his calculator still around and updated ?
I am pretty sure this is where it is now...https://www.3riversarchery.com/dynamic-spine-arrow-calculator-from-3rivers-archery.html
lt-m-grow:
I guess thats the same thing.... It sure looks different. I did not find "Arrow Dynamics" shafts listed. Oh well old guy stuff....
This is the download page.
https://heilakka.com/stumiller/
Flingblade:
Thanks for the link. I am going to save it as an update....
Have had mine downloaded to my computer for years......a big thanks to all the work Stu has put into making this happen.
I'll second that.... It works for me.
I also found it very close to what I could replicate using bare shaft method. I always use the calculator when helping others set up bow with properly spined arrows.
FYI - there's also a version on Rick Barbee's webpage at:
http://www.taylortel.net/~rickbarb/dynamic_spine_calculator.html
It has some more detail/info, but also has a few glitches
Quote from: streamguy on January 05, 2020, 10:57:43 AM
FYI - there's also a version on Rick Barbee's webpage at:
http://www.taylortel.net/~rickbarb/dynamic_spine_calculator.html
It has some more detail/info, but also has a few glitches
Thanks - I like this and it has A&H bows. Seems like these work a lot better when you can input your actual bow rather than "generic deflex" or something.