Hello all,
Attempting my first 3 piece takedown longbow. Everything was going great until tonight, when I had a brain fart and drilled the alignment pin hole on the wrong side of the limb :banghead:. My question is, can I "fix" this by filling the hole with epoxy or an epoxy/plug combo and then re-drill on the correct side? I'm hoping this will work and I dont have to start a new limb. Any help is appreciated.
Yep or just put an overlay on the face of limb...
If it is in the right place just drill all the way thru. And overlay the front on both limbs.
Sent from my SM-T550 using Tapatalk