Trad Gang

Main Boards => PowWow => Topic started by: Terry Green on July 16, 2019, 08:26:12 AM

Title: Who shoots 100 grain screw in heads?
Post by: Terry Green on July 16, 2019, 08:26:12 AM
Please post here....thx!
Title: Re: Who shoots 100 grain screw in heads?
Post by: GCook on July 16, 2019, 08:37:27 AM
I have.  Only for pigs thus far.  I run insert weights to get my up front load right.

Sent from my SM-G892A using Tapatalk

Title: Re: Who shoots 100 grain screw in heads?
Post by: Roy from Pa on July 16, 2019, 08:41:51 AM
I have and still do, depending on what the bow needs to tune.
Title: Re: Who shoots 100 grain screw in heads?
Post by: Terry Green on July 16, 2019, 08:44:02 AM
Ok Mr Cook Sir...

Would you like to test some "judo" type heads, beat the crap out of them and give a report back?...you can keep the heads and there is no cost to you except a little review on them...no hurry on the review finale as I'd like for you to use them for a while to get a durability test....just post back and email me your address if you want me to send them to you.
Title: Re: Who shoots 100 grain screw in heads?
Post by: SC Bowhunter on July 16, 2019, 08:44:33 AM
I do. I also use brass inserts up front as well.
Title: Re: Who shoots 100 grain screw in heads?
Post by: McDave on July 16, 2019, 09:12:57 AM
I shoot Zwickey 100 grain judo points just about every day on my 40# target bow for roving. If you like, I could try yours side by side, alternating shots, until one or the other wears out and then let you know the results.  I'll email you my address.
Title: Re: Who shoots 100 grain screw in heads?
Post by: Trenton G. on July 16, 2019, 10:20:50 AM
I shoot them as well depending on the bow that I'm using.
Title: Re: Who shoots 100 grain screw in heads?
Post by: WVbowhunter on July 16, 2019, 10:34:46 AM
I run them with one of my bows up at the front of 2016 aluminums
Title: Re: Who shoots 100 grain screw in heads?
Post by: Terry Green on July 16, 2019, 10:59:53 AM
OK Mr Lenhart Sir...

Would you like to test some "judo" type heads, beat the crap out of them and give a report back?...you can keep the heads and there is no cost to you except a little review on them...no hurry on the review finale as I'd like for you to use them for a while to get a durability test....just post back and email me your address if you want me to send them to you.

Title: Re: Who shoots 100 grain screw in heads?
Post by: SAM E. STEPHENS on July 16, 2019, 11:25:58 AM
I'll run some 100gr points on a few set-ups when using brass insert. I'm a make it work type guy...

,,Sam,,
Title: Re: Who shoots 100 grain screw in heads?
Post by: SC Bowhunter on July 16, 2019, 11:35:24 AM
Terry,
I would be glad to!
I emailed you my address.
Title: Re: Who shoots 100 grain screw in heads?
Post by: cacciatore on July 16, 2019, 01:28:20 PM
After many years I am going to start to use them for 3D, when other people use 5gpp and I am @10gpp for competitions there isn't no chance.
But for hunting I still stick with my 250-300 grs points
Title: Re: Who shoots 100 grain screw in heads?
Post by: starshooter on July 16, 2019, 01:52:09 PM
I'd be interested as well but have question about the FOC . Right now I am shooting 195 upfront  ( 125g point + 70g steel outsert )So maybe I could add a 20 gr bushing inside the arrow ? Just talking from a tune perspective. 🙏
Title: Re: Who shoots 100 grain screw in heads?
Post by: blacktailbob on July 16, 2019, 03:58:11 PM
If you have any left over include me. in.

Thanks
Title: Re: Who shoots 100 grain screw in heads?
Post by: GCook on July 16, 2019, 09:27:05 PM
Terry I appreciate the offer.  Currently I don't have any arrows set up to use them with and this time of year I work 6&7 days a week so I dont get to get out much.  Most of my shooting is a few arrows in the evening in the back yard.  Things will slow down in a couple of months but I wouldn't be able to get you any quick feed back.

Sent from my SM-G892A using Tapatalk

Title: Re: Who shoots 100 grain screw in heads?
Post by: Terry Green on July 17, 2019, 06:37:55 AM
Looks like I have 4 guys...I think I have 4 heads....

I'll get these out soon...
Title: Re: Who shoots 100 grain screw in heads?
Post by: Tim Hoeck on July 18, 2019, 03:47:03 PM
I run the 100 judo with 75gr insert or 125 gr judo with a 50 gr insert
Title: Re: Who shoots 100 grain screw in heads?
Post by: OkKeith on July 19, 2019, 08:26:52 PM
My wife shoots 100gr Stingers. Her arrows are only 28" long and nothing else tunes good. With a 26" draw it's a short trip from too stiff to too weak.

OkKeith
Title: Re: Who shoots 100 grain screw in heads?
Post by: chris K. on July 20, 2019, 09:41:16 AM
Used 100 gr. Thunderheads and Magnus heads
Title: Re: Who shoots 100 grain screw in heads?
Post by: chris K. on July 20, 2019, 09:46:44 AM
I may not be able to say that though?
Title: Re: Who shoots 100 grain screw in heads?
Post by: Terry Green on July 20, 2019, 12:08:19 PM
I'm sorry Chris...not sure what you are getting at...I had 4 heads and I have shipped four heads( As stated above) to folks  That are willing to test this head snd offer a report..... Now I'm done.... And just  waiting on the reports... if you have an issue with this thread please email me directly.....Thx.  :campfire: