I'm getting a order ready to sent to kenny and want to order a SPECTRAPLY riser but cant decide on color..
Does anyone have pictures of risers that they can share with coffee or nutmeg or dessert?
Thanks for any help
I have a order from Kenny probably get here tomorrow for coffee & wild fire I could take a pic of the coffee if you like ? but probably not tell the week end I won't be back in town tell Friday !
Not the same as seeing a riser carved out but you can maybe get an idea here ...
https://www.cwp-usa.com/collections/spectraply-panel-10x35/products/spectraply-panels-coffee
[attachment=1][attachment=2]
right side is desert
What angle you sawing that to get that effect.
45 degree end to end.
That sounds a bit steep Roy.
It was a guess, Kenny told me one time but ya know how an old farts mind wanders:)
Yep he told me once to and I ferget. Maybe Kenny can remind us soon. :bigsmyl:
Heck, he prolly forgot too :)
:laughing:
Kenny has a mind like a steel trap! Rusty!
I have a jig that sets the back end of the blank over 3/8" , and set the blade angle to 2 degrees making a compound angle . You can change the angle of the pattern easily by changing the blade angle a bit if you don't like the first results.
Then with the blank face down (grain you want) square the sides up.
When cutting the veneers off the blank, I change ends with blank each pass because if your bandsaw blade is not perfectly square with table, you will change the pattern in a few passes.
I couldn't decide on 1 color so I ordered two different colors. Just have to make two bows :goldtooth:
Thanks Kenny. I m pretty sharp but pretty sure Elroy is rusty.
Nothing wrong with making two bows.
Sent from my SM-J737V using Tapatalk
Kenny, that is a great idea to set the blade to 2 degrees, This old head would never have thought of that, learning all the time is good.