Anybody got any quick and easy tips?
Just use a hair dryer, works real good.
I do a quick dip in boiling water and they peel right off. Or buy some cheap wraps and they fall off on there own :banghead:
I just did this the other day, had a few I needed to get off. and didn't want to spend 2 hours picking it off.
I cut a piece of metal pipe , sealed the bottom with epoxy. poured some goof off in and pulled my nock and stuck the arrow in. in just a few minutes I just wiped it off with a rag. thats how il be doing it from now on.
(https://i.imgur.com/0sfXsR0.jpg)
(https://i.imgur.com/Xd8YRhE.jpg)
(https://i.imgur.com/UyaFxTl.jpg)
I use a feather stripper that I bought off 3 Rivers and strip off all my wraps. Then I rub off the residue with denatured alcohol. I found this way to be the quickest cleanest way.
Quote from: Lakerat007 on April 03, 2019, 02:16:18 AM
I do a quick dip in boiling water and they peel right off. Or buy some cheap wraps and they fall off on there own :banghead:
Boiling water is so easy!
Sent from my iPhone using Tapatalk
I use a heat gun on low. Come right off, then wipe down with acetone and ready to install new.
Mike
I agree with using a heat gun on low, that seems to work pretty well.
Bill
Heat gun on low, very quick I don't even remove feature first just Heat and peel wipe with acetone
Heat gun here. But the Goof off method merits my attention as well. Think I will try that next time.
I use one of those tapered scrapers from Cir-Cut Archery. Does a great job.
I do the same thing as arrow 30 but use acetone and do 6 arrows at a time .