Print Page - Quiver Repair

Title: Quiver Repair
Post by: Alexander Traditional on December 17, 2018, 02:21:24 PM

I have a Big Jim's side quiver,and the foam is shot on it. I was going to replace it with foam,but it didn't last long at all the first time.

I came up with this wood solution. Would you guys put a thin piece of foam on top for sound and looks?

Title: Re: Quiver Repair
Post by: Alexander Traditional on December 17, 2018, 02:22:16 PM

[attachment=1]

Title: Re: Quiver Repair
Post by: Alexander Traditional on December 17, 2018, 02:23:00 PM

[attachment=1]

Title: Re: Quiver Repair
Post by: Pat B on December 17, 2018, 06:33:21 PM

I do something similar with the Side Stalker style quivers I make. I use a piece of 1x pine(3/4") and taper the edges then glue on the foam for broadheads. The tapered "plug" fits tight in the bottom, sliding in from the inside.
(https://i.imgur.com/cVvsMab.jpg)

(https://i.imgur.com/bEdh6Me.jpg)

(https://i.imgur.com/d2exnhm.jpg)

Title: Re: Quiver Repair
Post by: Alexander Traditional on December 18, 2018, 01:59:55 AM

Very nice,I think I will put some foam on top.

Trad Gang

Main Boards => PowWow => Topic started by: Alexander Traditional on December 17, 2018, 02:21:24 PM