Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Si on December 16, 2018, 11:52:37 AM

Title: Ilf wedge build
Post by: Si on December 16, 2018, 11:52:37 AM
Can someone give me a link or links to making ilf wedges? I had one and lost it. Thanks and merry Christmas.
Title: Re: Ilf wedge build
Post by: pigops on December 18, 2018, 04:24:59 PM
Interested as well!
Title: Re: Ilf wedge build
Post by: kennym on December 18, 2018, 05:46:49 PM
I made a jig to use on the end of my edge sander. Made a couple sets and limbs and decided it wasn't my thing. If I still have the jig, I'll take a pic of it.
Title: Re: Ilf wedge build
Post by: Crooked Stic on December 19, 2018, 08:28:39 AM
[attachment=1]
Title: Re: Ilf wedge build
Post by: Crooked Stic on December 19, 2018, 08:32:01 AM
[attachment=1]
Title: Re: Ilf wedge build
Post by: Robertfishes on December 19, 2018, 09:19:03 AM
Keep in mind the specs Crooked Stic posted are finished limb widths and thicknesses.. The wedge will be thinner after you subtract the glass, taper and any parallel or veneer thicknesses. I copied a ILF wedge jig made by "Trux Turning" and it has worked very well.
Text only | Text with Images