Just received a new, in-stock bow from a well respected bowyer yesterday after work. Shoots just fine, but there is what seems to me a noticeable blemish: Belly side of upper limb has some "milky" spots, which I know is common, but there is a long straight line of it running most of the length of the limb. I doubt this would have any effect on performance, but I'd like to hear how you might look at the issue.
Like I said, bow was not custom for me, but purchased new at full price.
New at full price, bowyer needs to make right unless it was bought "as is". If not, send it back!
Sent from my iPhone using Tapatalk
if its a white streak in the fiberglass, thats common these days. is it a dark vaneer under glass?
I believe that you should be letting the bowyer know of your concerns.
Quote from: Caddo on August 24, 2018, 01:05:26 PM
New at full price, bowyer needs to make right unless it was bought "as is". If not, send it back!
+1, only I would probably just call him and tell him I wanted to send it back for a refund, for the reason you stated. At that point, if he volunteers to knock $100-$200 off the price, I would consider it. I wouldn't bring that up myself, though. If he doesn't offer you a discount for the blemish, then just ask for a refund. If the blemish was caused by the fiberglass rather than the finish, it might not be a simple fix.
All bowyers should inspect their bows before they ship them. I have had several bowyers tell me in advance about some blemish they found, and offer to knock something off the price or at least offer to let me send it back at their expense if I didn't like the bow. In both cases I kept the bows. In one case the blemish was so minor I wouldn't have even noticed it on my own.
It should have been communicated by the seller that the bow was in less than perfect condition. And at least a discount offered. That said most of, if not all of our sponsors are first class and should make good. Not sure about others. I've got a number of bows in that condition and don't mind it but I too would want a heads up upon purchase.
Sent from my iPhone using Tapatalk
Quote from: Hermon on August 24, 2018, 01:38:21 PM
I believe that you should be letting the bowyer know of your concerns.
Yes sir!
Always the first step
:archer:
I don't believe I have ever had a bow with clear glass that did not have some degree of white blemish in the limbs. If it is too much of a blemish for you to live with I'd just send it back and try again.
It is a whitish streak, on dark veneer under clear glass. Just never seen that in a long straight line; I don't know whether it's from the finish or the glass.
I'm inclined to go with the general suggestion of letting the bowyer know, and seeing get his opinion on the matter.
I feel your pain. I bought a bow with beautiful veneers. I got the bow and the belly side top and bottom had horrible streaks the length of the limb. I like the bow,but would not get another one. Bowyers can sort through glass. I have a number of Big Jim bows,and none of them even have a hint of streaking.
I had a longbow once that was a reputable make and it developed 2 glass cracks on the belly and back of both limbs top to bottom. Ugly it was but I shot it forever like that.
Sent from my iPhone using Tapatalk
That could be the reason it was a stock bow.
There was a long period of time where it was difficult to get clear glass for bows that didn't have streaks. Most bowyer's were frustrated with it. Not sure if anything has changed. I imagine it's hard to hide imperfections in darker limbs.
Some bowyer's are better at recognizing these imperfections in the glass before they lay up the bow
Was it that way when you bought it ? Or, did that happen while shooting ? If you bought it that way, they may or may not take it back. If it happened while shooting, I'd call them and tell them it's on it's way back.
just cover it up with a camo sleeve so you don't see it, that's what I did. if it aint cracked don't worry about it.
The bow maker should always be the very first person contacted about something like this. Clear glass can be a problem and often the blemish does not show up until the tape is removed from the limb late along in the build as I understand it. I prefer colored glass any way. :)
I have two bows in my inventory at LifeCycle Gear that have cosmetic flaws. I always describe the flaws on the website and verify that the customer understands the presence of a cosmetic flaw before shipping. I also discount bows by 10-20% depending on the flaw.
White spots or streaks with clear glass are common, but that doesn't mean you should pay full price.
I agree with others that contacting the bowyer is the first, best step.
Best of luck and let me know if I can help in anyway.
Ron
Not having any idea of how bad the blemishes are in your bow, it's hard to say what level you have received and what should be considered a discountable offense. At any rate, the bowyer should offer at the very least a refund even if the bow was perfect.
It is impossible to say who notices what and what has become acceptible. I will say that I haven't produced a bow in years that I didn't find imperfections in the glass. Only on rare ocasions have the customers ever said they noticed.
I buy and inspect the same glass that everyone else does. I even switched to the new super clear and absolutlely perfect glass... It is obvious to me that my reading glasses are better than many others who toubt this new glass as perfect. It is nice, but far from perfect.
It is impossible to find all the "bad" blemishes before glue up. Again, bowyers should offer info up front or at least replacement.
I needed to build a gloss bow with dark veneers. I agonized over this build and the second build, and the third build and the fourth build!!! All the previous bows looked beautiful in satin and yes, you could see a glass streak or two.
Finally I finished a bow that I thought was somewhat acceptable but cringed at the thought of shipping it. The customer was very pleased... even said it was the most beautiful bow he had ever seen! ... but I didn't see that.
If you (meaning anyone..not necessarily the author of this post) are looking for a perfect bow, I know that I can't build one.
I guess I could switch to colored glass. Have you ever noticed that no one complains how streaky it is... and it's bad! I guess it's ok to have streaks on colored bows.
BigJim