Does anybody know who carries these inserts for GT trads in 50 gr. ?
Ace makes them in 75gr. Maybe they can file them down to 50gr by request.
I have some of the 75 gr. If I can't find any 50 gr I may try grinding some down.
Kustom King has them for GTs, but don't know the weight.
They are very good about answering questions with a call.
Just checked KK website and didn't see them listed.
I've got 100 and 125 and they are pretty short, I'm not sure a 50 wouldn't be a disaster.
1/4 Away, here's a link - listed under broadheads.
http://www.kustomkingarchery.com/Broadhead-Adapter-Glue-In/productinfo/A1093/
Thanks.
Yep. I believe the aluminum glue-in/glue on are near 50 grains. Don't think brass comes in that light.
There are no 50 grainers in those. Not possible since there would be not enough material left to have any strength. dino
I have some glue in/glue on aluminum adaptors that fit my Easton Axis shafts that weigh 36 grains. I expect they would be 10-15 grains heavier in an adaptor that would fit a larger 5/16 shaft.