Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: John Malone on April 16, 2018, 05:40:13 PM

Title: Heat treating and unibond?
Post by: John Malone on April 16, 2018, 05:40:13 PM
He guys, just wondering if you can heat treat a belly after a bamboo backing was added using unibond?
Title: Re: Heat treating and unibond?
Post by: Roy from Pa on April 16, 2018, 06:08:34 PM
Yup, just don't over heat.
Title: Re: Heat treating and unibond?
Post by: Wolftrail on April 16, 2018, 06:33:24 PM
Quote from: Roy from Pa on April 16, 2018, 06:08:34 PM
Yup, just don't over heat.
Sure enough I have heated laminated  limbs for twist correction and the glue held.
Title: Re: Heat treating and unibond?
Post by: John Malone on April 16, 2018, 08:55:48 PM
Thanks guys. Just need to touch it up so to speak.
Title: Re: Heat treating and unibond?
Post by: Eric Krewson on April 17, 2018, 09:14:05 AM
I often bend handles to align the limbs, I never had a handle glued on with the old Urac turn loose but did have one glued on with unibond turn loose.
Text only | Text with Images