Finally got em tweaked out to suit me, and got some printed today!!
They are on my site now too....
Thanks for your patience!! :thumbsup:
(http://i.imgur.com/yB3MK05.jpg)
Are you going to have the router patterns on this one?
Yes sir, it's on my site just now.
Awesome
I guess it's OK.. :)
Nice!!!
Only thing your missing now is an original kennym recurve design.
Looks good Kenny!!!
That's great Kenny thanks for doing that
Thank you guys!
Brad, my next is going to be a 48/50" kids D/R just like Dad's! Deciding whether to go 1" or a little wider at fades.... :)
I designed a recurve with the grip loosely based off the Kodiak hunter(1 bow off that form),1.5" wide, was quiet, it shot well, but I just am not a recurve guy.....
I'm trying not to think about it. :biglaugh:
Well I got my form blank screwed and glued today. just waiting on the blueprint and router pattern. :archer2:
HA , your router template will be a day later Mike.
I never heard back yesterday and didn't think about it this morn! Will go in AM and I got the shipping on it tho.
I even got a riser block glued up.I can work on that and grind some lams.Got a Miller get together tomorrow so will be Monday before I am back at it anyhow.
just a waitin (http://i.imgur.com/30ZbVmn.jpg)
You guys might want to try one of these. Figured I would make for myself. They are pretty quick smooth and point good. This one is 64 in. 49@28
(http://i.imgur.com/7vhRAa8.jpg)
(http://i.imgur.com/IaNOEXv.jpg)
(http://i.imgur.com/MPg04oj.jpg)
Nice, And now I want one, not until after season though.
Guys you got to try this one if you build your own. Here is my second one. A sweet design. (https://i.imgur.com/PDm05P4.jpg?2)
Thanks Mike!!
I sure love mine, 4 deer and a bobcat last year with a prototype. This one shoots even better for me! Think I have my 3 piece longbow for life! :)
Looks awesome Stic
That is good news - I just got the plans from Kenny. The build is going to have to wait until this winter though - not enough time now!
Stic - yours looks great.
Looks like a great bow! I guess now I have my winter project.
I guess I should say that the riser shape on mine is not Kennys shape. The pad angles are by the plan. I just happen to like my riser shape. Although I want to try the shape of the one on the left side of the plans.
Kenny on the kids bow you are considering try gluing up with 2" glass then ripping the blank down the middle. You end up about 7/8" at the fades. And you have 2 blanks for the effort of one glue up. I used a 10" riser and bows were the 48" to 50" that you are looking for.
I made a form an inch wide and split the glass with a utility knife. Haven't finished it yet, busy busy!
That's a poor excuse boy.. :laughing:
Best I got, ol boy!! :D