Show me some of your gizmos for holding a one piece bow for spraying. I have been doing the riser section first and letting it cure then spraying the limbs and resting the bow on the riser section. Not always the best way.
I twist a piece of safety wire around the string nock and then touch up nock by hand latter.
Same as Al here....
Yep. I use a piece of stainless wire. Between sessions I hang it from the other end to ensure both tips get finish in their string grooves.
I do the same, I hang mine horizontal by the tips with bow string then spray entire bow then I hit the tips and blend it in.
I drill a tiny hole through the top tip overlay. I use it to tie the bow up to spray and then use it later for a string keeper.
Pearl, that's gotta be the best yet. :thumbsup:
I can come up with good stuff, once in a blue moon :)
I use a 1/8" dowel pin for pinning lams and so forth.
I Super glue mine under the leather
(http://i.imgur.com/hIbPNFl.jpg)