Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Mike Taylor2 on June 22, 2017, 04:45:00 PM

Title: Sanding Belts
Post by: Mike Taylor2 on June 22, 2017, 04:45:00 PM
I'm looking for a good company that carries 6"/89" sanding belts for fiberglass bows.  The cheap belts only hold up for a few minutes.  What type of belt material am I looking for and where do I purchase it.  

Thanks in advance.
Title: Re: Sanding Belts
Post by: Roy from Pa on June 22, 2017, 05:02:00 PM
http://www.supergrit.com/products/products_belts-zirconia
Title: Re: Sanding Belts
Post by: Bowjunkie on June 22, 2017, 05:28:00 PM
Zirconia or ceramic last longer. Lots of places carry them. You can even get them on the big auction site. Just search your belt size. 6 x 89 sanding belt.

Keystone Abrasives is another, for instance. They sell them on their website.
Title: Re: Sanding Belts
Post by: Robertfishes on June 22, 2017, 05:49:00 PM
I have had good luck with supergrit zirc belts.
Title: Re: Sanding Belts
Post by: Mad Max on June 22, 2017, 07:48:00 PM
QuoteOriginally posted by Roy from Pa:
 http://www.supergrit.com/products/products_belts-zirconia  
Me too
Title: Re: Sanding Belts
Post by: JamesV on June 23, 2017, 11:10:00 AM
I buy all my belts from Industrial Abrasives. They can suggest the best belt for your application. They also offer buy one get one free on most belts,Check them out

James
Title: Re: Sanding Belts
Post by: Roy from Pa on June 23, 2017, 12:02:00 PM
That's not a bad deal there. What's the price for a 6 x 89 belt? I buy in bulk from supergrit for a better price.
Text only | Text with Images