Working at designing a three piece TD 14" riser with 62 or 64" limbs. generally how far do the limbs over lap the riser pads where the bolt and alignment pin are?
I have built two 3 piece bows (all wood) and use a 3 3/4". My PSE recurve has a 3 1/2" riser pad. I think some guys build using a 4" pad.
I use 4" on my 15",17", and 19" riser and 3.5" on my 13" risers.
Thanks Guys, As of now I'm leaning toward 3.5"
Thanks Guys, As of now I'm leaning toward 3.5"