Does anyone here have any experience converting a wood riser to accept ILF limbs?
I have an SF Optimo Wood 19" riser, similar to Samick Sage and I hope to use ILF limbs for them.
Did a search here but no luck unless I have been using the wrong key words.
Thank you in advance
Robertfishes does some ILF stuff, he may be able to help you.
But in general with a wood riser you should be able to mill a slot for the ILF inserts they sell and a hole for the limb bolt anchor.
Sorry, just making sure. "milling", meaning I can cut into the wood itself? Which I never thought of. Will that be strong enough?
Thank you
I am only building ILF limbs. I have never made an ILF riser, I buy risers. So I can't help
My guess is you'll have to mill a slot in the wood and fit a ilf dovetail fitting to the riser. Wouldn't trust a dovetail in the wood itself.
QuoteOriginally posted by Doug_K:
My guess is you'll have to mill a slot in the wood and fit a ilf dovetail fitting to the riser. Wouldn't trust a dovetail in the wood itself.
X2
Thank you