Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: styksnstryngs on June 21, 2015, 11:05:00 AM

Title: All natural help
Post by: styksnstryngs on June 21, 2015, 11:05:00 AM
I'm planning on a boo or hickory backed rd bow. About 64, 65", snd 40#@28". If I use 1/8" hickory to back, how thick of ipe or jatoba will I need? This may be a TD with a 14" riser, not sure yet.
Title: Re: All natural help
Post by: PEARL DRUMS on June 21, 2015, 11:28:00 AM
Start with slat no less than 1/2" thick. Your tiller, limb length and limb width will determine its finish thickness.
Title: Re: All natural help
Post by: John Scifres on June 21, 2015, 08:31:00 PM
I'd go 1-1/2" wide and 3/8" thick for a 40# bow.
Title: Re: All natural help
Post by: LittleBen on June 21, 2015, 09:05:00 PM
QuoteOriginally posted by John Scifres:
I'd go 1-1/2" wide and 3/8" thick for a 40# bow.
X2 ... That'll give you plenty of thickness to tiller down to 40#
Text only | Text with Images