Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Echatham on May 18, 2014, 09:32:00 AM

Title: Bruising on bamboo backer
Post by: Echatham on May 18, 2014, 09:32:00 AM
 (http://i1308.photobucket.com/albums/s608/echatham/Mobile%20Uploads/IMG_20140518_090756_496_zpstjwubya2.jpg) (http://s1308.photobucket.com/user/echatham/media/Mobile%20Uploads/IMG_20140518_090756_496_zpstjwubya2.jpg.html)
 (http://i1308.photobucket.com/albums/s608/echatham/Mobile%20Uploads/IMG_20140518_090830_713_zps5eofkb6h.jpg) (http://s1308.photobucket.com/user/echatham/media/Mobile%20Uploads/IMG_20140518_090830_713_zps5eofkb6h.jpg.html)

Should i be concerned with the integrity of the back or only cosmetic?  First picture is with rind scraped off and second pic is raw.
Title: Re: Bruising on bamboo backer
Post by: tenbrook on May 18, 2014, 09:59:00 AM
Looks fine to me!
Title: Re: Bruising on bamboo backer
Post by: Prairie Drifter on May 18, 2014, 11:05:00 AM
Looks like a water stain. Only cosmetic. I see it all the time building bamboo fly rods.
Title: Re: Bruising on bamboo backer
Post by: Echatham on May 18, 2014, 03:09:00 PM
no its not a stain... its where the rind was dinged up. you can feel a depression when you run your finger over it.
Title: Re: Bruising on bamboo backer
Post by: JamesV on May 21, 2014, 08:40:00 AM
As long as the fibers are not broken I would use it
Title: Re: Bruising on bamboo backer
Post by: Roy from Pa on May 21, 2014, 09:29:00 AM
The rind got peeled off, no biggie. Ifin yer skeered to use it, send it to the ole man in Pa..  :)
Title: Re: Bruising on bamboo backer
Post by: Bowjunkie on May 21, 2014, 11:33:00 AM
In the first picture, there is no rind. It has been removed below the node. I see what could be 2 bruised spots.
Title: Re: Bruising on bamboo backer
Post by: Echatham on May 21, 2014, 01:05:00 PM
Jeff yes i scraped the rind off there.. the bruised spots looked like the bottom picture before scraping.  Roy i aint skeered.  almost ready for a low brace.     :thumbsup:
Title: Re: Bruising on bamboo backer
Post by: Zradix on May 24, 2014, 03:24:00 PM
Good luck Eric!