How do you go about marking the center line on your limbs? Do you mount them on the riser first? What process or tool do you use? Any pics would help.
I have a 6" x 10" x 6' steel tube, that i use as a true work bench,
the only take down that i have built i put the limbs on the riser, made sure all was square, by flipping the bow from left side to right side, and splitting the difference, tightened it up. and using a pencil and the right sized wooden block- i scribed a center line down the whole rig( masking tape on back)
This is how I do it.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=print_topic;f=125;t=008181