Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: EHK on February 08, 2014, 07:18:00 AM

Title: Belt sanders
Post by: EHK on February 08, 2014, 07:18:00 AM
I'm thinking about upgrading from my Rigid combo belt/spindle sander.  It seems like it often goes out of square which obviously causes some challenges.  

As much as I'd love to get a grizzly edge sander, that's just not in the budget.  I've been looking at the Grizzly combo belt/disc sander wondering it that will do as well.  Any comments/feedback?

Thanks...Eric
Title: Re: Belt sanders
Post by: T Folts on February 08, 2014, 07:46:00 AM
I bought a Grizzly edge sander of craigslist for 300.00 After using it for over a year I could of used my 6X48 combo. I use the rubber spindle on the end a lot. The edge sander sure helps. Before I got the grizzly I converted a 4X36 to a edge sander and used it a lot.
Title: Re: Belt sanders
Post by: Jon in North Idaho on February 08, 2014, 07:00:00 PM
Yep - a 36" belt (even a benchtop) does great.  I'd still love an edge sander, but the price is definitely a factor....
Title: Re: Belt sanders
Post by: Roy from Pa on February 08, 2014, 07:06:00 PM
Look for a used one.
Title: Re: Belt sanders
Post by: Cootling on February 09, 2014, 07:14:00 PM
Watch Craigslist.  If you are patient, you may be able to find an edge sander for the price of the combo machine.
Title: Re: Belt sanders
Post by: Robertfishes on February 09, 2014, 09:51:00 PM
Last year a guy put an add on C-list along with a pic for a grizzly GO512 wrap around edge Sander.. I drove 100 miles with cash to look at it..well it was not a 512 it was a 1140 Grizzly sander. At first I was not too happy, he said his nephew did the add for him and goofed up using a stock grizzly picture ..he dropped price to half of asking price and I now have it in my shop. I see them come up for sale every now and then.
Title: Re: Belt sanders
Post by: EHK on February 10, 2014, 07:04:00 AM
I did a search a few days ago and 0 results, but I'll keep looking.  Thanks.
Title: Re: Belt sanders
Post by: Roy from Pa on February 10, 2014, 07:27:00 AM
They are out there, just be patient and it will come.
Title: Re: Belt sanders
Post by: Robertfishes on February 10, 2014, 09:10:00 AM
When searching on Craigslist make sure you search  both edge sander and belt sander.. a quick search for edge sander a few minutes ago shows a 6x108 grizzly G9982 oscillating edge sander near me. It did not show up when I searched belt sander but edge sander worked. I have the little Rigid belt sander and am working on setting up my 6x80 grizzly with a pattern sander on the motor side.
Title: Re: Belt sanders
Post by: bamboo on February 10, 2014, 09:33:00 PM
check craigs every day--something will show up
I got this beast for the same price as as an 80" grizz--
6"x 132"--3hp [made in usa]
 (http://i275.photobucket.com/albums/jj319/kittitiny/Mobile%20Uploads/7311c4da-d8a5-47b0-9cfc-74cc69fb0fe5.jpg) (http://s275.photobucket.com/user/kittitiny/media/Mobile%20Uploads/7311c4da-d8a5-47b0-9cfc-74cc69fb0fe5.jpg.html)