Is there any point in putting carbon in the limb for the sake of stability and smoothness maybe, or will he and resin add only unnecessary weight .
(http://i853.photobucket.com/albums/ab99/tragomvuka/unnamed.jpg)
This ain`t carbon- as the description tells it`s an alternative thing!
Shall add stability AND weight as well but gotta look cool under clear glass...
I have experimented quite a bit with different type of carbon last year. I have never used Stabil Core because I don't think you will gain a lot, if any performance. The carbon lams from Bingham Project were not really exiting either. To much resin and therefore they're to heavy. The best I have used so far was a unidirectional carbon band with some lateral fibers to hold everything in place ( something like this ).
http://site.leadong-web.com/servlet/smartImg?photoType=18&keyValue=jIAUfpKpZTEe&lanCode=1&moduleId=smart&cache=0&r=1333177227521
No that stuff really rocks, saves weight on the limbs and adds a fair amount of performance. But you have to use it with care ( take the thin one ) because it puts a tremendous pressure on the belly limbs. If you use a veneer that can't take the pressure, the limbs might explode sooner or later. Don't ask me how I figured that one out... :banghead:
__________
Andy