Print Page - brace height for kenny m bows

Title: brace height for kenny m bows
Post by: fujimo on December 23, 2013, 09:13:00 PM

whats a good starting brace height for the kenny m longbows- measured from the back i geuss
thanks

Title: Re: brace height for kenny m bows
Post by: kennym on December 23, 2013, 10:04:00 PM

I usually make the grip 1.75" deep from the bow back, and an inch wide . Brace is 6.5 to 7 from the part of grip where your hand goes.(deep part)

So if you go from back, around 8.75 or a bit less....

Title: Re: brace height for kenny m bows
Post by: fujimo on December 23, 2013, 10:24:00 PM

thank you sir :)

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: fujimo on December 23, 2013, 09:13:00 PM