Hey guys.
Any of you know where to buy a good straight grained piece of osage about 1/4" thick x 72" or so for a tri lam?
I know pine hollow has good osage that's 5/8" thick.
Problem is I don't have a band saw and I'll just end up wasting/sanding 3/8" away.
You might try a lamination grinder. There are a few here on TradGang or maybe try Bingham Projects.
Kenny M if he has any available.
Just sent Kenny an email.
Thanks for the idea.
Didn't think he did stuff like this but doesn't hurt to ask I guess.
Kenny has cut me some 1/8 osage lams before, no reason he couldn't make them thicker.
Kenny should be able to hook you up, also Mike at Pine Hollow Longbows will have it too.
I've been talking with both.
Thanks guys.
Sounds like Kenny will hook me up.