with the forms for glass bows, and the heat issues in the oven, what would be considered the best glue for laminating the layers of plywood together.
i did also screw them together.
i ask this 'cos i saw the post where patb "undid" a backed bow with a heatgun!
thanks
wayne
I just use a stuff over here called Aquadhere, I think its called . A white PVA type, but same as you I screw all mine as well. Never had a problem up to this point.
Weldwood Dap brand I think works well.
I used Tightbond on my bow presses and then put plenty of screws in them. They've been in and out of hot boxes many times without issue.
What kind of glue did Pat use on that bow? I'm just curious.
QuoteOriginally posted by Bowjunkie:
I used Tightbond on my bow presses and then put plenty of screws in them. They've been in and out of hot boxes many times without issue.
Me too. :thumbsup:
Me 3. On the TB. With plenty of screws.
Bonner
thanks fella's
thats what i did on the last one- will continue to do so.
i think...pat used tb 1 or 2.
but would have to check with him i guess.