Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: cbatzi01 on September 04, 2013, 03:24:00 PM

Title: Limb wedge dimensions for Bingham's takedown plans
Post by: cbatzi01 on September 04, 2013, 03:24:00 PM
Hi,

I was wondering if anyone had dimensions for the limb wedges used in the Binghams take down plans?  

I was hoping to make them myself rather than order them.  

Thanks!
Chris
Title: Re: Limb wedge dimensions for Bingham's takedown plans
Post by: kennym on September 04, 2013, 06:14:00 PM
Sure,

3/8" thick ,

8.25" long on the shorter recurve bows and TD longbow,

10.25 " long on longer recurves

2.25" flat on butt end , then taper to feathered end..
Text only | Text with Images