Hi guys this is my first post can someone tell me what the brace should be for the Bingham 68 inch take down longbow7?
Nothing set in stone on any bow. I build the one piece Binghams and tend to keep the brace height as low as possible. Usually around 7". An arrow pass cut closer to center tends to make lower brace heights easier to use
Thanks for the info the string they sent with the kit was 64" it gives me a brace of 9" seems high to me it is the pronounced take down
Around 8" on the pronounced
I have built a few of the pronounced T/D longbows in the 62" range. Mine seem to like somewhere in the 8.5-9" range. That high of a brace height took a little to get used to but they shoot REALLY quiet in that range.