Not sure where to post this so here goes.
I have a Jack Howard Game Master Jet; 40# @ 28 that I want to tune up and am using Stu's dynamic Calculator for Arrow selection.
My Questions:
1. Did he use a polyester string? I have two originals?
2. Any idea how far the string is off center or the best way to determine this? +1/16 or +1/8, etc... I guess this in part depends on my side strike plate...?
3. His suggested nocking point placement?
I see brace height is 6 1/8 - 6 3/4 from string to bottom of grip.
I wish I had a copy of his instructions which came with bows so if you know where I can find it please let me know.
Any other suggestions are welcome. Thank you!!
Sorry I can't help you with any of questions. You might post on the powwow see threads on Howard bows from time to time. You sir a lucky individual to own that bow always wanted one. Sure wish it were me asking the questions as I would be the owner LOL.
I would post this on Pow Wow and one of the "Jack Howard Guys" like Kelly, Ryan, Charlie or others will probably know. I have the paperwork at home and will try to bring it in tonight if they don't respond.
Kyle
Thank you, I appreciate your comments.
Kyle, that would be great on the paperwork if it comes to it.
And Jess, I hear you. It was a fluke how I came into the bow several years back and I'm grateful to have such a pleasant shooting bow. Basically a guy I knew had it made for him and switched to shooting longbows only and sold it to me.
I never tuned it up and I want to start over with it. Bare shaft, paper test, really fine tune it and use it for hunting black tail.