My trade bow is almost done and needs only final finishing. I have a question though. I sprayed on several coats of shellac and I want to dull down the shine a bit with a coat of spray minwax poly. Do I need to scuff the shellac first or will it go on as is? Will shellac or poly cause water based acrylic artists ink to smudge?
Thanks.
Dave.
A light sanding will help with adhesion. Maybe 100 grit.
I would test the application on the inks before brushing or rubbing on poly or shellac. A light spray poly or shellac should not cause a problem.
Thanks John. The test piece is drying now and I'll try the poly on it when it's ready.
I went out and bought some art acryilic inks. They're so much better than the paint pens I was using before.
Dave.
I have never had acrylic inks run with Tru-oil poly or shellac.
I sprayed my test piece and it worked out. From now on it's acrylics for me.
Dave.