Print Page - Sky Rogue bow help

Title: Sky Rogue bow help
Post by: emt137 on September 19, 2012, 09:24:00 PM

Hey Guys,

I have an email in to Mr Belcher at Sky Archery, but was hoping maybe some of you guys might be able to help me out also.

I have a Sky Rogue I am getting set up. I got the bow used from the classifieds here. I was hoping someone could help me out with brace height range and, hopefully, the range of grains per pound for arrows.

Thanks in advance, and I hope one of you guys can help me out.

Pat

Title: Re: Sky Rogue bow help
Post by: rainman on September 20, 2012, 12:43:00 AM

Earl Hoyt Sky start at a brace height of 71/4 inches. I would not go below 8gpp for 3d. If it is for hunting heavier arrows will help to quiet the bow.

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: emt137 on September 19, 2012, 09:24:00 PM