Well what are your thoughts.how good was the design.how did it shoot.were you satisfied.what would you alter if your were gonna build another from that basic design. I am about to build one and want to get your input.
Thanks guys!
I am in the same boat as you. I just finished my form and have a all wood laminate limb in there now curing so I can see the profile and any flaws before going to glass. Good luck with yours.
(http://i43.photobucket.com/albums/e369/STRINGSTRETCHER/firsttry001.jpg)
you too bud
im trying it with carbon...we'll see....
It's a good shooing bow.
It is a very good proven design.
It is a good design IMO. When using a carbon back I drop the stack 20-25% to get the same weight with a glass back
sorry could you clearify what you mean about dropping the stack
stack = total thickness of lams,fiberglass/carbon.
I measure mine at the butt of the lams.
For a 62" Binghams pronounced T/D on my form:
.310 stack with glass = 50 #
.250 stack with carbon back = 50#
I am just finishing my first bow from there designs and found small inconsistencies in the drawings, but if you measure everything yourself you should be fine. It is a lot of work to get it right but, it has been fun. You are brave going with carbon right a way! Look forward to seeing your progress.
thank you so much guys!