Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: kybowhunter2 on August 05, 2012, 01:45:00 PM

Title: Bow String Question
Post by: kybowhunter2 on August 05, 2012, 01:45:00 PM
I have my bow almost finished. How do I figure out what size string I need to order for it. I dont have the stuff to make one so Im gonna have to buy one. Also what is the best stuff to glue my tip overlays on with Thanks.
Title: Re: Bow String Question
Post by: Pat B on August 05, 2012, 02:02:00 PM
Tell us about yout bow. What is it made of? In what style is it made?
 Generally speaking you want your string for a longbow about 4" shorter than the N/N measurement down the back and about 3" shorter for a recurve...or is it the other way around?
Title: Re: Bow String Question
Post by: scottm on August 05, 2012, 02:03:00 PM
Ive ben told on glass bows CA glue (AKA super glue),or smooth on for tips.lots of guys seem to be using ca glue.Ive used CA and Urac for wood bows.Some people use Tight Bond wood glue.It depends what your bow is made of i guess.For string length,measure your bow,I think its 3" shorter for long bow and 4" shorter for recurve.Scott
Title: Re: Bow String Question
Post by: scottm on August 05, 2012, 02:06:00 PM
Pat you beat me to it.I was just thinking the same thig is it 3" or 4" shorter for long bow or recurve?LOL!I need to dig out my string board.I think i wrote it down.
Title: Re: Bow String Question
Post by: Bert Frelink on August 05, 2012, 02:18:00 PM
3" shorter for a Longbow and 4" shorter for a Recurve.  :scared:
Title: Re: Bow String Question
Post by: kybowhunter2 on August 05, 2012, 02:24:00 PM
Its is hickory self bow. I want to use wood and antler on my limb tips. I didnt know if the wood glue would bond with the antler. I was thinkin about epoxy but I was gonna get some more opinons on it first.
Title: Re: Bow String Question
Post by: scottm on August 05, 2012, 02:26:00 PM
Ive used CA glue on antler.Soak the antler on the back with super glue.Let it dry. rough it up a little and then ca glue to tips.Just make sure both the tips and antler are flat.Epoxy works also.Ive used the 5 min type.
Title: Re: Bow String Question
Post by: Red Tailed Hawk on August 05, 2012, 03:18:00 PM
ca glue for antler. I do it just like scottm
Title: Re: Bow String Question
Post by: Pat B on August 05, 2012, 03:21:00 PM
I've successfully used TB glue, super glue(thin and gel) and 5ton epoxy for antler tip overlays on wood bows.If you use super glue do as Scott said and soak the antler first to seal it.
Title: Re: Bow String Question
Post by: east_tx_pineknot on August 05, 2012, 05:12:00 PM
I use Smooth-On for overlays.  Wait 24 hours to cure, but it's worth the wait.  When it comes time to blend  in the overlay, Smooth On out performs CA Glue in my book.
Title: Re: Bow String Question
Post by: Grey Taylor on August 05, 2012, 05:16:00 PM
You've gotten plenty of info on overlay glue. As far as the string...
What I do is use an extra long one-loop Flemish string to tiller the bow. As I come to full brace it's easy to shorten the string with a bowyer's knot on the bottom bow tip. Once the bow is finished and the string is at full brace just measure the string and then order that finished length.

Guy
Text only | Text with Images