I got my tapers and lams in Also got my hot box and form done I want to make a bow 62' RD But my tapers are to long. Doo I cut the butt end or the thin end thank you BUCK
Since I measure the lams always on the butt end, I cut them on the thin end.
----------
Andy
I use the butt end for my stack thickness measurement so I normally cut the thin end. I usually leave the glass and lams longer than the finished length by a half inch to and inch on the glue up.
A few guys measure at the riser fades, but most beasure at the butt. If from Binghams, measure at butt.
Good luck and we want pics!! :thumbsup:
I measure at the butt as well. I leave everything full length when I glue up.
I use the measurement at the butt end for my stack. Like Kenny said if it is a Binghams plan measure at the butt.