Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Kevin Breaux on June 25, 2012, 02:16:00 AM

Title: Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers
Post by: Kevin Breaux on June 25, 2012, 02:16:00 AM
This was started on 15 June and finished the 26th of June. There were 6 half days and the other 4 were 12 hour days,
  66" 3-piece T/D, Cocobolo and Zebrawood. (http://smg.photobucket.com/albums/v437/BloodTracker/15%20to%2026%20June%202012%20%20Three%20piece%20take%20down%20recurve/Chucks%203piece%20take%20down%2066%20recurve%201526%20June%202012/)
Title: Re: Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers
Post by: BenBow on June 25, 2012, 09:49:00 AM
Hey Kevin it's good to see your still at it. Nice bow for sure.
galen
Title: Re: Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers
Post by: Sam Harper on June 25, 2012, 01:44:00 PM
Very cool.  Thanks for showing us.
Title: Re: Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers
Post by: Johan van Niekerk on June 25, 2012, 02:52:00 PM
LOVE the photos. I just learned a very good "trick". Use tape to stick them slippery gluey limbs down before trying to apply pressure.

Obvious now that I've seen it...wish it was as obvious all those times I made bows with limbs that ended up shifting under pressure
Title: Re: Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers
Post by: inksoup on June 26, 2012, 04:57:00 AM
says this content is not available???
Text only | Text with Images