Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: wood carver 2 on February 12, 2012, 06:29:00 PM

Title: Another I beam question.
Post by: wood carver 2 on February 12, 2012, 06:29:00 PM
If I don't want an I beam to show in the arrow pass, would it be ok to laminate it off centre in the riser? I have 2 risers that are 1 1/4" thick and I want to add a 1/4" I beam to bring them up to 1 1/2".
Dave.
Title: Re: Another I beam question.
Post by: Trux Turning on February 12, 2012, 06:32:00 PM
You can do it that way- no problem. It will show on the belly side of the grip. I've seen a few done that way and they look good.
Title: Re: Another I beam question.
Post by: wood carver 2 on February 12, 2012, 06:34:00 PM
That's what I was hoping to hear.  :thumbsup:  Thanks Trux.
Dave.
Text only | Text with Images