Text only | Text with Images

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: giff on October 09, 2011, 05:48:00 PM

Title: ILF limb pocket angle
Post by: giff on October 09, 2011, 05:48:00 PM
I am working in a 15" ILF riser and was wondering if anyone knows what angle the limb pockets should be. I have them at 12* now, knowing that its easier to take off than add on. I thought I read somewhere that most bowyers use 14*, but cant remember where so that I can make sure.
Title: Re: ILF limb pocket angle
Post by: beleg on October 09, 2011, 09:37:00 PM
IIRC it was about 17°, it depends on the draw lenght you have.
It also dependes on the deflex of the riser.
Hope this helps.
Martin
Title: Re: ILF limb pocket angle
Post by: vanillabear? on October 09, 2011, 10:18:00 PM
Title: Re: ILF limb pocket angle
Post by: giff on October 10, 2011, 03:12:00 PM
alright, thanks
Title: Re: ILF limb pocket angle
Post by: beleg on October 11, 2011, 07:12:00 AM
I found this oon internet some time ago:
(http://i235.photobucket.com/albums/ee157/beleg2/Titan20vs_20BB20vs_20Pinnacle.jpg)
Martin
Text only | Text with Images