Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: razorback on July 25, 2011, 05:23:00 PM

Title: Which end for a nocking groove
Post by: razorback on July 25, 2011, 05:23:00 PM
I want to put a nocking groove on my trade bow. They always seem to make stringing the bow easier. However I am confused as to which end to put it. To my logic the bottom would be the correct end as the string should stay in the groove at the top if you lean the bow against the wall unstrung, and then put the string in the bottom groove. However it seems that the rest of the world think differently to me and I'm wondering how sooooo many can be wrong, cause it can't be me just ask the wife.
Title: Re: Which end for a nocking groove
Post by: Art B on July 25, 2011, 06:47:00 PM
It wouldn't make any difference really. But I think most folks are more comfortable with stringing their bows upright........Art
Title: Re: Which end for a nocking groove
Post by: DVSHUNTER on July 25, 2011, 06:56:00 PM
If you put it on the bottom, you have to string it up lefthanded. top limb is for righties.
Title: Re: Which end for a nocking groove
Post by: razorback on July 25, 2011, 07:11:00 PM
dv, why does it matter left or right if you are holding it horizontal to use a stringer. Not sure what I am missing here.
Title: Re: Which end for a nocking groove
Post by: John Scifres on July 25, 2011, 08:57:00 PM
It's OK to be a little different.
Title: Re: Which end for a nocking groove
Post by: fujimo on July 25, 2011, 09:03:00 PM
i put mine in the top , as i always tie a bowyers knot on the bottom, and leave the loop to slide down over the top limb
Title: Re: Which end for a nocking groove
Post by: DVSHUNTER on July 25, 2011, 10:30:00 PM
I think it has something to do with gravity. Especially important during the moon phases during the rut. Will the bow be used during the rut? If so I'd definitely put it on the bottom limb so the bow points up when you string it. If you're just using it for target them the top so it points down when stringing... Or maybe I'm reveresed. Roy will know, or maybe semo.
Title: Re: Which end for a nocking groove
Post by: 2treks on July 25, 2011, 10:32:00 PM
I thinkDVS was funnin ya.
You could do like Mr. Ed Scott and slip the string out of the top limb grooves and then stand the bow upside down so the string stays hanging free.
Title: Re: Which end for a nocking groove
Post by: Roy from Pa on July 25, 2011, 10:56:00 PM
I talked to your wife this morning about this. She said you wuz goofy, I stuck up for ya and told her ya wuz only half goofy:) But DVS is goofy:) Real Trad bowyers just use duct tape to hold their strings on...   :)  

But I only use one groove and use a bow stringer to string my bows up. It's hard enough for me to get two straight string grooves, let alone a third:)
Title: Re: Which end for a nocking groove
Post by: 4est trekker on July 25, 2011, 11:05:00 PM
I've done them on both.  I don't have a preference, as I store my bows horizontally and use a string keeper.  Lately, I've been putting them on both nocks, which I find is a little easier and safer. I'm glad you're looking into this, though.  It sure it a lot better for you bow, provided you do it right.  Just my $0.02, for what it's worth...   :)
Title: Re: Which end for a nocking groove
Post by: SEMO_HUNTER on July 25, 2011, 11:27:00 PM
I'm not getting involved in this one, but I agree DVS is goofy but so is Roybert. So I guess it kinda evens out.   :knothead:    :goldtooth:
Title: Re: Which end for a nocking groove
Post by: Shaun on July 25, 2011, 11:58:00 PM
If you use step through or push/pull, the bow will be right way up if you string to the top nock.