Print Page - Help with draw weight

Title: Help with draw weight
Post by: Mckenzie on June 15, 2011, 10:41:00 PM

The bow I just glued up seems a bit light by the way it is flexing. Does anyone have a way to test draw weight before filing string grooves? I'd rather know the weight before I glue on tip overlays in case I need to shorten it. It is a R/D 66" longbow. Any help is appreciated. MK

Title: Re: Help with draw weight
Post by: kennym on June 15, 2011, 10:44:00 PM

I cut the grooves and check , then glue on overlays. Or if it seems stiff, cut em a couple inches long....

Title: Re: Help with draw weight
Post by: jess stuart on June 16, 2011, 09:07:00 PM

I never tried it but, I wonder if tying a set of temporary nocks on like are used on some wooden bows. One could shorten it without cutting in nocks, and adjust as needed. Might be worth trying.

Title: Re: Help with draw weight
Post by: red hill on June 16, 2011, 09:58:00 PM

That's what I was wondering, Jess. Worth a shot.
Stan

Title: Re: Help with draw weight
Post by: Trux Turning on June 16, 2011, 10:09:00 PM

I think with a 66 incher-you can either go with the temporary nocks or cut some in without overlays.

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Mckenzie on June 15, 2011, 10:41:00 PM