I have been buying Lams or paying someone else to grind them for me for years. I finally purchased a drum sander so I could do my own. Any suggestions on a good base that won't slip etc?
I was plannig on having a thick piece of action wood made with the taper and then gluing sanding belt strip to it to prevent slipping. I have buit around 150 bows... But have never ground a single lam myself. Any and all suggestions would be much appreciated.
The machine I bought is a Jet 16-32... I'm going to pick tin up in two days... So just trying to get ready to give it a try.
Thanks - Cam
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=125;t=006234 Kirk will give you some great ideas if you contact him or check out his website!
thanks for the info... I really appreciate it.