Print Page - New bow in its finishing stages

Title: New bow in its finishing stages
Post by: StoneAK on May 12, 2011, 10:45:00 PM

It is Hickory Backed Ipe with cocobolo riser and tip overlays (//%5Burl=http://images.imagelinky.com/1305254550.jpg%5D%20%20%5Bimg%5Dhttp://images.imagelinky.com/1305254550.jpg)[/url] [/IMG]
(//%5Burl=http://images.imagelinky.com/1305254580.jpg%5D%20%20%5Bimg%5Dhttp://images.imagelinky.com/1305254580.jpg)[/url] [/IMG]
(//%5Burl=http://images.imagelinky.com/1305254610.jpg%5D%20%20%5Bimg%5Dhttp://images.imagelinky.com/1305254610.jpg)[/url] [/IMG]
(//%5Burl=http://images.imagelinky.com/1305254646.jpg%5D%20%20%5Bimg%5Dhttp://images.imagelinky.com/1305254646.jpg)[/url] [/IMG] (//%5Burl=http://images.imagelinky.com/1305254727.jpg%5D%20%20%5Bimg%5Dhttp://images.imagelinky.com/1305254727.jpg)[/url] [/IMG]

Title: Re: New bow in its finishing stages
Post by: don s on May 12, 2011, 10:53:00 PM

that is a sharp looking bow. how about full draw and the specs. don

Title: Re: New bow in its finishing stages
Post by: StoneAK on May 12, 2011, 10:55:00 PM

I haven't taken the full draw pics yet. It is 50# at 28" 66" NTN it has some good zip with the added reflex/ deflex design.

Title: Re: New bow in its finishing stages
Post by: okie64 on May 13, 2011, 07:24:00 AM

That is a great-lookin bow!

Title: Re: New bow in its finishing stages
Post by: SEMO_HUNTER on May 13, 2011, 08:23:00 AM

That looks real nice Lester. Those 2 woods compliment each other nicely and did you notice if the IPE was unusually oily over other woods?

Mind if I ask where you get the IPE? I looked at Lowes and it's a special order thing and minimum 1 bundle order. It's outrageously expensive, I just need a piece or two to play around with before buying anymore and see if I like it.

Maybe you could point me in the right direction?

Title: Re: New bow in its finishing stages
Post by: StoneAK on May 13, 2011, 12:13:00 PM

The Ipe is pretty oily and takes time to dry the finish. I have brazilian walnut hard wood floors which is Ipe and they say it is 10X harder than oak you can see it when you start to file it out and work with it. I will PM you to let you know where I get it.

Title: Re: New bow in its finishing stages
Post by: Loren Holland on May 15, 2011, 01:47:00 AM

semo,
go to a decking supply store. Ipe is very popular for decks because because of how well it takes being wet. you can usually buy individual boards. expect to pay about 3 dollars a ft though. still for the price, if you have a decent bandsaw, you can cut 6 bows from one board.

Title: Re: New bow in its finishing stages
Post by: Loren Holland on May 15, 2011, 01:48:00 AM

oh sorry...pretty bow StoneAK, what are the dimensions? how much reflex did you glue in?

Title: Re: New bow in its finishing stages
Post by: StoneAK on May 15, 2011, 07:24:00 PM

This bow has settled in at 2 1/2 inches at the tips. It is 50# at 28"after about 100 shots or so.66"NTN

Title: Re: New bow in its finishing stages
Post by: Lee Slikkers on May 15, 2011, 09:09:00 PM

:thumbsup:

Title: Re: New bow in its finishing stages
Post by: StoneAK on May 15, 2011, 09:28:00 PM

Thanks Lee I sent you an email earlier with a tracking number.

Title: Re: New bow in its finishing stages
Post by: Lee Slikkers on May 15, 2011, 09:37:00 PM

Yup, got it! Thanks again~

Title: Re: New bow in its finishing stages
Post by: StoneAK on May 16, 2011, 10:39:00 AM

No problem

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: StoneAK on May 12, 2011, 10:45:00 PM