Print Page - My first build along TAKE DOWN RECURVE

Title: My first build along TAKE DOWN RECURVE
Post by: NRudder on April 27, 2011, 01:31:00 AM

So here I go on my fist build along

1) Here are the brackets for my press I made myself

All welded and drilled

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110052.jpg)

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy3ofP1110051.jpg)

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110050.jpg)

Title: Re: My first build along TAKE DOWN RECURVE
Post by: NRudder on April 27, 2011, 01:33:00 AM

2) I put the brackets aside and worked on my heat box

Here is my heat box first

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110053.jpg)

I then put some weather stripping where the lid sits

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110054.jpg)

I then cocked the inside with some white cocking

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110058.jpg)

The I started to install electrical

First I installed two gang boxes

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110056.jpg)

http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=Copy2ofP1110055.jpg

Title: Re: My first build along TAKE DOWN RECURVE
Post by: NRudder on April 27, 2011, 01:33:00 AM

Then I started wiring fro one to another

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=CopyofP1110057.jpg)

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=P1110061.jpg)

Then I installed a plug end on my power cord that lead out of my heat box

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=P1110060.jpg)

Then I attached that cord ran the cord out of the box

Here is my finished wiring job

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=P1110062.jpg)

Next I started to line my box with aluminum foil and tape

(http://s1195.photobucket.com/albums/aa396/NRootski/?action=view¤t=P1110063.jpg)

That all I got for now hope you like it any suggestion and tip would me very helpful. Tomorrow ill add some pics of my riser and finished heat box

Title: Re: My first build along TAKE DOWN RECURVE
Post by: NRudder on April 27, 2011, 01:35:00 AM

do my photos show up ??? if not how do i get the to go on? im using photo bucket and its not working

Title: Re: My first build along TAKE DOWN RECURVE
Post by: matts2 on April 27, 2011, 08:32:00 AM

I don't see them. You should be using the [img] links?

Title: Re: My first build along TAKE DOWN RECURVE
Post by: fujimo on April 27, 2011, 08:58:00 AM

i use imagelinky.com- soooo easy!

Title: Re: My first build along TAKE DOWN RECURVE
Post by: AKmud on April 27, 2011, 03:37:00 PM

using photobucket, copy the "direct link" code then place it in the popup box here under the img tab.

Title: Re: My first build along TAKE DOWN RECURVE
Post by: NRudder on April 27, 2011, 09:08:00 PM

I started a new one with pics check er out thanks for the incight

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: NRudder on April 27, 2011, 01:31:00 AM