Print Page - worm holes in lams

Title: worm holes in lams
Post by: blacktailchaser on March 23, 2011, 02:13:00 PM

i have a peice of burl wood and it has some worm holes in it..could it still be used for lams..john

Title: Re: worm holes in lams
Post by: Robertfishes on March 23, 2011, 02:31:00 PM

I bought some nice Honduran Rosewood veneer last year that also has small pinhead holes thru it....I know smooth on will fill these small holes but not sure how they will look under clear glass? How big are your worm holes??

Title: Re: worm holes in lams
Post by: blacktailchaser on March 23, 2011, 02:44:00 PM

the biggest one is 1" long and a 1/4 wide..john

Title: Re: worm holes in lams
Post by: Sixby on March 23, 2011, 06:20:00 PM

make some sawdust and put a little drop of super glue in the hole and fill it with sawdust. voila, hole is gone./ Thats a pretty big worm hole but it would be worth a try,. if its on an end you might splice another type of veneer in and use most of your lams.

God bless, Steve

Title: Re: worm holes in lams
Post by: blacktailchaser on March 23, 2011, 11:45:00 PM

thanks so much for the info steve..when i get ready to do this i will try it..its kind of funny that you are in medford..i just moved from eagle point back out to prineville..BLESSINGS..john

Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: blacktailchaser on March 23, 2011, 02:13:00 PM